The bearing capacity of beam is insufficient, how to reinforce

What are the commonly used structural reinforcement methods when the beam bearing capacity is insufficient? bonded carbon fiber fabric, bonded steel plate, enlarged section.

2018-08-22 18:20:50

Strengthening methods for reinforced concrete(RC) colum

There are many reinforcement methods of reinforced concrete column, such as enlarging section method, enclosing steel reinforcement method, prestressed strut reinforcement method, displacement method, carbon fiber reinforcement method, etc.

2018-08-20 17:08:51

Reinforcement and inspection of cast-in-place concrete slab

In residential building project, before the construction of cushion layer and surface layer, cracks less than 0.3 mm were found in cast-in-situ concrete slab, and leakage was found after water injection. After core drilling, it was found that the cracks were caused by concrete strength and slab thickness not meeting the design requirements.

2018-08-17 17:21:29

Application of CFRP in strengthening RC Beams

The flexural and shear bearing capacity of concrete beams strengthened with CFRP is significantly improved. CFRP can effectively inhibit the development of cracks, and make the width and spacing of cracks smaller.

2018-08-16 16:45:35

Comparison between AFRP reinforcement and other reinforcement

AFRP composites have a series of advantages, such as light weight, high strength, high modulus, good corrosion resistance, non-conductivity, good impact resistance and so on. Therefore, it has a very wide range of applications in bridge, tunnel, subway, harbor and industrial and civil construction projects, especially in the field of concrete structure reinforcement and repair.

2018-08-13 17:31:54

The advantages of carbon fiber strip reinforcement

Carbon fiber composite strengthening methods include carbon fiber fabric strengthening and carbon fiber strip strengthening, and carbon fiber strip reinfrocement has many advantages over carbon fiber fabric reinforcement.

2018-08-13 15:37:11

Whether FRP composite system can reinforce steel structure

FRP composite material have high strength and specific stiffness, to achieve the same reinforcement effec. The size of the composite material is obviously less than the size of the steel plate, after reinforcement, it does not increase the weight of the original structure and the size of the original component.

2018-08-03 18:47:07

High temperature welding on post installed anchoring

The anchoring adhesive is less than 80 C, and the high temperature produced in the welding is extremely unfavorable to the rebar adhesive, which usually directly affects the performance of the rebar adhesive and affects the anchorage and strengthening effect of the reinforcement.

2018-08-02 17:47:34

Strengthening of cap and beam of bridge pier and abutment

Strengthening of cap and beam of bridge pier and abutment

2018-07-31 17:09:10

Bridge abutment strengthening

Bridge abutment strengthening

2018-07-31 16:55:41
Back
Top
Close