1. Inicio
  2. Solución

Methods to improve the seismic capacity of structures

Reinforcement of reinforced concrete surface layer; Reinforcement of reinforced concrete mortar with surface layer; Steel jacketing reinforcement; Bond steel plate reinforcement; FRP composite reinforcement

2018-06-06 17:30:23

Seismic strengthening methods for reinfroced concrete structures

Improve the performance of column and beam for seismic strengthening (1) externally added reinforced concrete surface layer (2) bonded steel plate reinforcement (3) steel jecketing (4) carbon fiber strengthening

2018-06-06 17:32:52

Repair technology for cracks in concrete and masonry

The key point of crack repair works is to design according to the types of cracks, determine the repair materials, repair methods and repair time.

2018-06-06 15:48:40

Preventive measure of structural strengthening

Preventive measure of structural strengthening: CFRP strengthening, steel plate strengthening, post installed anchoring.

2018-06-05 18:16:31

Post-installed Rebar Connections with Anchoring Adhesive

Post installed anchor with chemical anchoring adhesive is a simple and effective connection and anchorage technique for concrete structures, which can be implanted in ordinary steel and bolt anchorage. It is now widely used in strengthening and rebuilding of buildings.

2018-06-04 17:40:36

Strengthening Reinforced Concrete with Opening

Strengthening and rehabilitation of reinforced concrete(RC) member with opening by carbon fiber reinfroced polymer(CFRP) and bonded steel plate.

2018-05-31 18:02:01

Strengthening of beams and slabs with steel plate

Strengthening of beams and slabs with steel plate:1.substrate surface clean; 2.scribe line ro setting out; 3.anchoring; 4.plate surface preparing; 5.bonding steel plate with the structural adhesive; 6.maintaince; 7.checking; 8.protection coating

2018-05-31 17:34:43

How to thickening concrete beams by post installed anchor

Beam thickness strengthening method must ensure that the new and old concrete has higher bond strength. The main points are as follows: the base course of the original component joint surface should be solid, the surface is rough and clean, the shrinkage stress of the new cast concrete is small, and the bond performance is good.

2018-05-31 17:08:29

Construction of column bonded angle steel

1.scaffolding 2.preparing the surface 3.installing the steel frame 4.sealing and setting gas vent 5.mixing and injecting the adhesive 6.curing and maintenance 7.examination 8.applying anti-corrosion measures

2018-05-31 16:45:00

Structural strengthening method for RC structural

Common structural strengthening method for reinforced concrete structure:Enlarging section reinforcement method; Steel plate strengthening; FRP composite strengthening

2018-05-30 17:15:21
Back
Top
Close